plow

[Grumpy]

Has anyone here ever used a JD GT 235 for a plow tractor?

 

[Cvans]

How many HP and what does it weigh?

 

[Grumpy]

17 HP ,
75 lbs. on each back wheel

 

[Cvans]

I take it you’re talking about plowing dirt not snow.
I have found that for a GT it’s easier to maintain a constant speed with a standard transmission. You can do it with a hydro but you’re constantly changing the settings.
The 235 isn’t really set up for that kind of work. Is there even a hitch available to raise and lower the plow with.

 

[Grumpy]

It has a factory sleeve hitch on it . I have plowed with it a little, but can't get tuned in the way I want.

 

[Cvans]

Without seeing or knowing what type of soil your working with it's going to be difficult to give you much help but I would say your 235 is not suited for this type of work. Your machine is more suited to doing lawn work than turning soil.

 

[BMaverick]

It has a factory sleeve hitch on it . I have plowed with it a little, but can't get tuned in the way I want.

Read some of this, it can help,

 

[Grumpy]

Read some of this, it can help,

Thanks for the info. My biggest problem is the front axle is wider then the rear axle. I need to get the inside of the front and rear tires in line.

 

[Propane1]

Might be able to flip the tires and wheels inside out. Front or back ones and that might help. Wheels might have an offset that would change the width of the track.

Noel.

 

[Grumpy]

Might be able to flip the tires and wheels inside out. Front or back ones and that might help. Wheels might have an offset that would change the width of the track.

Noel.

I've already done that. They are centered. No offset. going to make spacers.

 

[SimplyRad]

You might figure the amount of offset and get a spacer if the rear wheels are bolted on.