Yep its a new one for me also, looks like I'm going to have to make an extra long socket to get off tried with a box end wrench but I can't hold the CS well enough to get it to loosenNever seen one like that before Gary.
Noel
I think a 4.5 inch grinder with a zip wheel will take care of that issue nicely.Here's a couple of pictures of the PTO adapter bolt
yes it would but I'd like to keep it it may have value you know I could maybe get a cup of coffee and a twinkie or 2 or a raspberry filled donutI think a 4.5 inch grinder with a zip wheel will take care of that issue nicely.
No but we have had a few turtle concrete mixers goooood , Chris now you got me thinking that special bolt is more valuable all the time thinking a couple og concrete mixersYou just had to mention raspberry filled donuts didn't you. Now I won't be able to get that idea out of my head.
Have you ever had a raspberry concrete mixer at Culvers?
Tried similar to that but I can't hold the cs solid enough I have a strap wrench on the other end of the CS but its spongy , will get at the starter one of these first days and will see if it will runPut a long box wrench on that adapter, then hit the end of the wrench hard with a 2X4 but hit it square. Couple blows should break it loose. A vise grip on the shaft will keep the box wrench from flying off.
Too many hole in that 8 for me Chris I'd lose count Thanks it does run nice and it starts better/easier than the red one. Will run it some more tomorrow morning then its to decide what's up nextWish my straight 8 ran that nicely. Maybe I should have brought it to you first.
You wouldn't happen to have 8 of those? Nah that wouldn't work either.its to decide what's up next